 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: Date: B32537 May 2009 (c) EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polyester film capacitors (MKT-S) High reliability (wound) B32537 Typical applications Measurement equipment Rough environments High-rel circuits in industrial electronics Climatic Max. operating temperature: 125 C Climatic category (IEC 60068-1): 55/100/56 Features Optimum self-healing capability Excellent short circuit protection Very high reliability Construction Dielectric: polyethylene terephthalate (polyester, PET) Construction with structured metallization Tubular winding Encapsulated in metal tube Insulating sleeve Face ends sealed with epoxy resin Terminals Central axial leads, lead-free tinned Marking Manufacturer's logo, style (MKT-S), rated capacitance (coded) capacitance tolerance (code letter) rated voltage, date of manufacture (coded) Dimensional drawing Dimensions in mm Diameter d Lead diameter d1 <8.5 0.6 8.5 ... 16 >16 0.8 1.0 When bending leads take care to leave a clearance of 1 mm to the capacitor body. Delivery mode Bulk (untaped) For notes on taping, refer to chapter "Taping and packing". Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 20 B32537 High reliability (wound) Overview of types Type VR (V DC) VRMS (V AC) CR (F) 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 22 47 100 B32537 50 20 100 35 160 60 250 90 630 200 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 20 B32537 High reliability (wound) Ordering codes and packing units VR V DC 50 VRMS CR f 60 Hz V AC F 20 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 35 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 22 47 100 Max. dimensions dxl mm 7.4 x 18.5 7.4 x 18.5 7.4 x 18.5 7.4 x 18.5 8.4 x 21.0 9.4 x 21.0 10.7 x 21.0 11.7 x 21.0 12.7 x 21.0 7.4 x 18.5 7.4 x 18.5 7.4 x 18.5 7.4 x 18.5 7.4 x 18.5 7.4 x 18.5 8.4 x 21.0 8.4 x 21.0 9.4 x 21.0 9.4 x 21.0 11.7 x 21.0 10.7 x 34.0 10.7 x 34.0 15.7 x 34.0 20.7 x 34.0 29.7 x 34.0 Ordering code (composition see below) B32537B5474+000 B32537B5684+000 B32537B5105+000 B32537B5155+000 B32537B5225+000 B32537B5335+000 B32537B5475+000 B32537B5685+000 B32537B5106+000 B32537B1104+000 B32537B1154+000 B32537B1224+000 B32537B1334+000 B32537B1474+000 B32537B1684+000 B32537B1105+000 B32537B1155+000 B32537B1225+000 B32537B1335+000 B32537B1475+000 B32537B1685+000 B32537B1106+000 B32537B1226+000 B32537B1476+000 B32537B1107+000 Untaped pcs./MOQ 200 200 200 200 200 80 80 80 80 200 200 200 200 200 200 200 200 80 80 80 80 80 80 80 80 100 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = 10% J = 5% Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 20 B32537 High reliability (wound) Ordering codes and packing units VR V DC 160 VRMS CR f 60 Hz V AC F 60 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 90 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 Max. dimensions dxl mm 7.4 x 18.5 7.4 x 18.5 7.4 x 18.5 7.4 x 18.5 8.4 x 21.0 8.4 x 21.0 9.4 x 21.0 10.7 x 21.0 11.7 x 21.0 10.7 x 34.0 12.7 x 34.0 12.7 x 34.0 15.7 x 34.0 7.4 x 18.5 7.4 x 18.5 7.4 x 18.5 8.4 x 21.0 9.4 x 21.0 9.4 x 21.0 11.7 x 21.0 12.7 x 21.0 13.7 x 21.0 12.7 x 34.0 15.7 x 34.0 17.7 x 34.0 20.7 x 34.0 Ordering code (composition see below) B32537B2104+000 B32537B2154+000 B32537B2224+000 B32537B2334+000 B32537B2474+000 B32537B2684+000 B32537B2105+000 B32537B2155+000 B32537B2225+000 B32537B2335+000 B32537B2475+000 B32537B2685+000 B32537B2106+000 B32537B3104+000 B32537B3154+000 B32537B3224+000 B32537B3334+000 B32537B3474+000 B32537B3684+000 B32537B3105+000 B32537B3155+000 B32537B3225+000 B32537B3335+000 B32537B3475+000 B32537B3685+000 B32537B3106+000 Untaped pcs./MOQ 200 200 200 200 200 200 80 80 80 80 80 80 80 200 200 200 200 80 80 80 80 80 80 80 80 80 250 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = 10% J = 5% Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 20 B32537 High reliability (wound) Ordering codes and packing units VR V DC 630 VRMS CR f 60 Hz V AC F 200 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 Max. dimensions dxl mm 7.4 x 18.5 7.4 x 18.5 8.4 x 21.0 9.4 x 21.0 9.4 x 21.0 11.7 x 21.0 12.7 x 21.0 13.7 x 21.0 12.7 x 34.0 15.7 x 34.0 17.7 x 34.0 20.7 x 34.0 25.7 x 34.0 29.7 x 34.0 Ordering code (composition see below) B32537B8333+000 B32537B8473+000 B32537B8683+000 B32537B8104+000 B32537B8154+000 B32537B8224+000 B32537B8334+000 B32537B8474+000 B32537B8684+000 B32537B8105+000 B32537B8155+000 B32537B8225+000 B32537B8335+000 B32537B8475+000 Untaped pcs./MOQ 200 200 200 80 80 80 80 80 80 80 80 80 80 80 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = 10% J = 5% Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 20 B32537 High reliability (wound) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR 0.47 at 1 kHz 7 at 10 kHz 15 CR 0.33 F > 0.33 F 8 22 +125 C +100 C 55 C +85 C 8 25 10 Dissipation factor tan (in 10-3) CR (F) at 20 C (upper limit values) Insulation resistance Rins or time constant = CR Rins at 20 C, rel. humidity 65% (minimum as-delivered values) DC test voltage 0.47 < CR 4.7 4.7 < CR 10.0 > 10.0 > 15000 M > 5000 s 1.4 VR, 2 s TA (C) DC voltage derating Category voltage VC (continuous operation with VDC TA 85 VC = VR or VAC at f 60 Hz) 85 1 fit ( 1 10-9/h) at 0.5 200 000 h at 1.0 VR, 85 C For conversion to other operating conditions and temperatures, refer to chapter "Quality, 2 Reliability". Short circuit or open circuit Capacitance change C/C Dissipation factor tan Insulation resistance Rins or time constant = CR Rins Failure criteria: Total failure Failure due to variation of parameters > 10% > 1.5 upper limit value < 150 M (CR 0.33 F) < 50 s (CR > 0.33 F) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 20 B32537 High reliability (wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/s. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/s. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Length of capacitor VR VRMS V DC V AC 50 20 100 35 160 60 250 90 630 200 k0 values Length of capacitor VR VRMS V DC V AC 50 20 100 35 160 60 250 90 630 200 18.5 mm k0 in V2/s 250 2 600 6 400 11 500 50 400 21 mm 34 mm 18.5 mm dV/dt in V/s 2.5 13 20 23 40 21 mm 34 mm 1.5 9 12 16 26 6 8 10 18 150 1 800 3 840 8 000 32 800 1 200 2 560 5 000 22 700 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 20 B32537 High reliability (wound) Impedance Z versus frequency f (typical values) Permissible AC voltage VRMS versus frequency f Values can be obtained on request. In specific cases please provide a scaled voltage/ time graph and state operating conditions. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 20 B32537 High reliability (wound) Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 5 C 2.0 0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder 90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 1 s MKT boxed (except 2.5 x 6.5 x 7.2 mm) 260 5 C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 x 6.5 x 7.2 mm) MKP (lead spacing 7.5 mm) MKT uncoated (lead spacing 10 mm) insulated (B32559) 5 1 s <4s recommended soldering profile for MKT uncoated (lead spacing 10 mm) and insulated (B32559) Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 20 B32537 High reliability (wound) Immersion depth Shield Evaluation criteria: Visual inspection C/C0 tan 2.0 +0/ 0.5 mm from capacitor body or seating plane Heat-absorbing board, (1.5 0.5) mm thick, between capacitor body and liquid solder No visible damage 2% for MKT/MKP/MFP 5% for EMI suppression capacitors As specified in sectional specification Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 20 B32537 High reliability (wound) 1.3 General notes on soldering Permissible heat exposure loads on film capacitors are primarily characterized by the upper category temperature Tmax. Long exposure to temperatures above this type-related temperature limit can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical characteristics. For short exposures (as in practical soldering processes) the heat load (and thus the possible effects on a capacitor) will also depend on other factors like: Pre-heating temperature and time Forced cooling immediately after soldering Terminal characteristics: diameter, length, thermal resistance, special configurations (e.g. crimping) Height of capacitor above solder bath Shadowing by neighboring components Additional heating due to heat dissipation by neighboring components Use of solder-resist coatings The overheating associated with some of these factors can usually be reduced by suitable countermeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced cooling process may possibly have to be included. EPCOS recommends the following conditions: Pre-heating with a maximum temperature of 110 C Temperature inside the capacitor should not exceed the following limits: MKP/MFP 110 C MKT 160 C When SMD components are used together with leaded ones, the leaded film capacitors should not pass into the SMD adhesive curing oven. The leaded components should be assembled after the SMD curing step. Leaded film capacitors are not suitable for reflow soldering. Uncoated capacitors For uncoated MKT capacitors with lead spacings 10 mm (B32560/B32561) the following measures are recommended: pre-heating to not more than 110 C in the preheater phase rapid cooling after soldering Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 20 B32537 High reliability (wound) 2 Cleaning To determine whether the following solvents, often used to remove flux residues and other substances, are suitable for the capacitors described, refer to the table below: Type Ethanol, isopropanol, n-propanol n-propanol-water mixtures, water with surface tension-reducing tensides (neutral) Unsuitable Suitable Solvent from table A (see next page) Solvent from table B (see next page) MKT (uncoated) MKT, MKP, MFP (coated/boxed) Suitable In part suitable Unsuitable Suitable Even when suitable solvents are used, a reversible change of the electrical characteristics may occur in uncoated capacitors immediately after they are washed. Thus it is always recommended to dry the components (e.g. 4 h at 70 C) before they are subjected to subsequent electrical testing. Table A Manufacturers' designations for trifluoro-trichloro-ethane-based cleaning solvents (selection) Trifluoro-trichloroethane Freon TF Frigen 113 TR Arklone P Kaltron 113 MDR Flugene 113 Mixtures of trifluoro-trichloro-ethane with ethanol and isopropanol Freon TE 35; Freon TP 35; Freon TES Frigen 113 TR-E; Frigen 113 TR-P; Frigen TR-E 35 Arklone A; Arklone L; Arklone K Kaltron 113 MDA; Kaltron 113 MDI; Kaltron 113 MDI 35 Flugene 113 E; Flugene 113 IPA Manufacturer Du Pont Hoechst ICI Kali-Chemie Rhone-Progil Table B (worldwide banned substances) Manufacturers' designations for unsuitable cleaning solvents (selection) Mixtures of chlorinated hydrocarbons and ketones with fluorated hydrocarbons Freon TMC; Freon TA; Freon TC Arklone E Kaltron 113 MDD; Kaltron 113 MDK Flugene 113 CM Manufacturer Du Pont ICI Kali-Chemie Rhone-Progil Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 20 B32537 High reliability (wound) 3 Embedding of capacitors in finished assemblies In many applications, finished circuit assemblies are embedded in plastic resins. In this case, both chemical and thermal influences of the embedding ("potting") and curing processes must be taken into account. Our experience has shown that the following potting materials can be recommended: non-flexible epoxy resins with acid-anhydride hardeners; chemically inert, non-conducting fillers; maximum curing temperature of 100 C. Caution: Consult us first if you wish to embed uncoated types! Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 20 B32537 High reliability (wound) Cautions and warnings Do not exceed the upper category temperature (UCT). Do not apply any mechanical stress to the capacitor terminals. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after it has been soldered to the PC board. Do not pick up the PC board by the soldered capacitor. Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified lead spacing. Do not exceed the specified time or temperature limits during soldering. Avoid external energy inputs, such as fire or electricity. Avoid overload of the capacitors. The table below summarizes the safety instructions that must always be observed. A detailed description can be found in the relevant sections of the chapters "General technical information" and "Mounting guidelines". Topic Safety information Reference chapter "General technical information" Make sure that capacitors are stored within the 4.5 specified range of time, temperature and humidity "Storage conditions" conditions. Avoid external energy, such as fire or electricity 5.3 (passive flammability), avoid overload of the "Flammability" capacitors (active flammability) and consider the flammability of materials. Do not exceed the tested ability to withstand 5.2 vibration. The capacitors are tested to "Resistance to vibration" IEC 60068-2-6. EPCOS offers film capacitors specially designed for operation under more severe vibration regimes such as those found in automotive applications. Consult our catalog "Film Capacitors for Automotive Electronics". Storage conditions Flammability Resistance to vibration Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 20 B32537 High reliability (wound) Topic Soldering Safety information Do not exceed the specified time or temperature limits during soldering. Cleaning Use only suitable solvents for cleaning capacitors. Embedding of When embedding finished circuit assemblies in capacitors in plastic resins, chemical and thermal influences finished assemblies must be taken into account. Caution: Consult us first, if you also wish to embed other uncoated component types! Reference chapter "Mounting guidelines" 1 "Soldering" 2 "Cleaning" 3 "Embedding of capacitors in finished assemblies" Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 20 B32537 High reliability (wound) Symbols and terms Symbol C A C C CR C C/C C/CR dt t T tan V dV/dt V/t E ESL ESR f f1 German Warmeubergangszahl Temperaturkoeffizient der Kapazitat Kondensatoroberflache Feuchtekoeffizient der Kapazitat Kapazitat Nennkapazitat Absolute Kapazitatsanderung Relative Kapazitatsanderung (relative Abweichung vom Ist-Wert) Kapazitatstoleranz (relative Abweichung vom Nennwert) Differentielle Zeit Zeitintervall Absolute Temperaturanderung (Selbsterwarmung) Absolute Anderung des Verlustfaktors Absolute Spannungsanderung Differentielle Spannungsanderung (Spannungsflankensteilheit) Spannungsanderung pro Zeitintervall Aktivierungsenergie zur Diffusion Eigeninduktivitat Ersatz-Serienwiderstand Frequenz Grenzfrequenz fur thermisch bedingte Reduzierung der zulassigen Wechselspannung Frequency limit for reducing permissible Grenzfrequenz fur strombedingte AC voltage due to current limit Reduzierung der zulassigen Wechselspannung Resonant frequency Resonanzfrequenz Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur Diffusion Derating factor Deratingfaktor Current (peak) Stromspitze Category current (max. continuous Kategoriestrom (max. Dauerstrom) current) English Heat transfer coefficient Temperature coefficient of capacitance Capacitor surface area Humidity coefficient of capacitance Capacitance Rated capacitance Absolute capacitance change Relative capacitance change (relative deviation of actual value) Capacitance tolerance (relative deviation from rated capacitance) Time differential Time interval Absolute temperature change (self-heating) Absolute change of dissipation factor Absolute voltage change Time differential of voltage function (rate of voltage rise) Voltage change per time interval Activation energy for diffusion Self-inductance Equivalent series resistance Frequency Frequency limit for reducing permissible AC voltage due to thermal limits f2 fr FD FT i IC Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 20 B32537 High reliability (wound) Symbol IRMS iz k0 LS 0 test Pdiss Pgen Q R R Ri Rins RP RS S t T tan tan D tan P tan S TA Tmax Tmin tOL Top TR Tref tSL VAC English (Sinusoidal) alternating current, root-mean-square value Capacitance drift Pulse characteristic Series inductance Failure rate Constant failure rate during useful service life Failure rate, determined by tests Dissipated power Generated power Heat energy Density of water vapor in air Universal molar constant for gases Ohmic resistance of discharge circuit Internal resistance Insulation resistance Parallel resistance Series resistance severity (humidity test) Time Temperature Time constant Dissipation factor Dielectric component of dissipation factor Parallel component of dissipation factor Series component of dissipation factor Ambient temperature Upper category temperature Lower category temperature Operating life at operating temperature and voltage Operating temperature Rated temperature Reference temperature Reference service life AC voltage German (Sinusformiger) Wechselstrom Inkonstanz der Kapazitat Impulskennwert Serieninduktivitat Ausfallrate Konstante Ausfallrate in der Nutzungsphase Experimentell ermittelte Ausfallrate Abgegebene Verlustleistung Erzeugte Verlustleistung Warmeenergie Dichte von Wasserdampf in Luft Allg. Molarkonstante fur Gas Ohmscher Widerstand des Entladekreises Innenwiderstand Isolationswiderstand Parallelwiderstand Serienwiderstand Scharfegrad (Feuchtetest) Zeit Temperatur Zeitkonstante Verlustfaktor Dielektrischer Anteil des Verlustfaktors Parallelanteil des Verlfustfaktors Serienanteil des Verlustfaktors Umgebungstemperatur Obere Kategorietemperatur Untere Kategorietemperatur Betriebszeit bei Betriebstemperatur und -spannung Beriebstemperatur Nenntemperatur Referenztemperatur Referenz-Lebensdauer Wechselspannung Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 20 B32537 High reliability (wound) Symbol VC VC,RMS VCD Vch VDC VFB Vi Vo Vop Vp Vpp VR R English Category voltage Category AC voltage Corona-discharge onset voltage Charging voltage DC voltage Fly-back capacitor voltage Input voltage Output voltage Operating voltage Peak pulse voltage Peak-to-peak voltage Impedance Rated voltage Amplitude of rated AC voltage (Sinusoidal) alternating voltage, root-mean-square value S-correction voltage Snubber capacitor voltage Impedance Lead spacing German Kategoriespannung (Sinusformige) Kategorie-Wechselspannung Teilentlade-Einsatzspannung Ladespannung Gleichspannung Spannung (Flyback) Eingangsspannung Ausgangssspannung Betriebsspannung Impuls-Spitzenspannung Spannungshub Nennspannung Amplitude der Nenn-Wechselspannung (Sinusformige) Wechselspannung Spannung bei Anwendung "S-correction" Spannung bei Anwendung "Beschaltung" Scheinwiderstand Rasterma VRMS VSC Vsn Z Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 20 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 20 of 20 |
Price & Availability of B32537B2104
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |